Recommended SuppliesAdhesive and Setting Systems
A crucial step in the installation process is choosing the most suitable adhesive and setting system for the installation of your new hardwood flooring and underlayment. Our adhesives and setting systems can be used in a wide range of environments from manufacturing, healthcare, commercial, and private residential use.
Our FlexiKork® sound control underlayment and MRP® engineered wide-plank hardwood floors, together with compatible adhesive and setting systems will ensure your flooring project will install smoothly and last for many years, decades to come.
Complete Floor SystemUZIN®
Premium Self-Leveling CompoundUZIN® NC 170 Leveler
Premium low-stress, cementitious self-leveling and smoothing compound. Provides an extremely hard, smooth finish without depth limitations.
Properties:
- No depth limitations – versatile
- Fast drying – accelerates floor covering installation
- Shear resistant under wood flooring and underlayment
- Suitable for all glue down wood applications
1-Component Surface StrengthenerUZIN® PE 414 Turbo
Its fast drying polyurethane formula acts a surface strengthener and consolidator on absorbent and non-absorbent substrates.
Properties:
- Fast drying for quicker installations
- Single component and ready to use
- Low viscosity for excellent surface penetration
- Alkali resistant – Meets ASTM D1308
- Water and solvent free – Meets strict EMICODE EC 1R PLUS criteria (healthy indoor air quality and very low emission)
- LEED contributing product
2-Component Specialty Flooring AdhesiveUZIN® MK 92 S
Hard, sheet-resistant and quick-setting universal flooring adhesive for all types of flooring.
Properties:
- Universal use
- Excellent ridge formation
- Rapid setting
- Hard adhesive according to ISO 17 178
- Without any emollient ingredients
- For interior use
- LEED contributing product
Complete Floor SystemBona®
Premium Self-Leveling CompoundBona® H660
A cementitious, acrylic polymer enhanced, self-smoothing, leveling compound for the application below resilient floor coverings, textile floorings, cork, and parquet.
Properties:
- Self leveling
- Self smoothing
- Quickly walkable
- Applicable in a thickness layer from 1 to 10mm
- Suitable on radiant heat systems
1-Component Surface StrengthenerBona® R540
A 1-component, roll-on moisture membrane specially designed to mitigate vapor transmission on absorbent and non-absorbent subfloors, including Gypsum-based underlayments
Properties:
- Easy to apply – rolls on
- Helps mitigate potential moisture issues
- Dries fast
- Suitable on radiant heat systems
1-Component Specialty Flooring AdhesiveBona® R851
Provides exceptional green grab strength and unsurpassed final sheet strength compared to competitive products.
Properties:
- Excellent initial “green grab” – the floor/underlayment stays in place.
- No “memory” so floor seams will not move apart
- Rapid sheer strength development
- Easy to apply and clean.
- Can be used with radiant heat systems
- Zero VOC’s
Complete Floor SystemPallmann®
Premium Self-Leveling CompoundPallmann® P25
Universal, self-leveling underlayment and smoothing compound designed for wood floor installations. Suitable for use over structurally sound solid concrete in new construction or renovations projects above, on or below grade.
Properties:
- 1/16″ to 1″ depth range
- Fast Setting
- Shear resistant under wood flooring
- High compressive and tensile strength
- Can be used with radiant heat systems
1-Component Surface StrengthenerPallmann® P104
1-Component polyurethane fast drying primer for flooring installations. Acts as a primer and surface strengthener on absorbent and non-absorbent surfaces and as a moisture vapor retarder
Properties:
- 1-component – no mixing required
- Fast drying
- Low viscosity
- Moisture-cured, modified polyurethane pre-polymers
- Water free, solvent free
1-Component Moisture Cured AdhesivePallmann® P5
Solvent and water-free, flexible 1-component moisture cured STP (Silane Terminated Prepolymer) hybrid adhesive that combines the powerful flexibility of polyurethane adhesive with the advantage of modern modified silane technology.
Properties:
- 1-component – no mixing requred
- Excellent ridge formation promotes adhesive transfer and stability
- Easy, effortless troweling
- Can be used with radiant heat systems
- Water and solvent free – Meets strict EMICODE EC 1R PLUS criteria (healthy indoor air quality and very low emission)
